Introduction

Introduction

Water level meter can do manual inspection which can be used to observe the water level inside water wells, boreholes, water level pipes, etc. 

The advantage is water level meter can check the water level in an accurate, fast, and simple way with its sensitive sensor.

There are 2 types for Naijiu Water Level Meter: ABS material blue & Ion blue, length from 30m-800m, we can do customization according to the customer requirements.

Main Parts

1. Probe

Material: Stainless Steel 

2. Steel ruler

Material: Steel & Plastic

3. Receiving system

It consist of Sounder (beep) & indicator light 

Specification For 30m-500m, exceed 500m need to do customization.

Minimum Reading(mm): 1.0

Repetitive Reading(mm):±2.0

Operation Voltage(V): DC=9

Operation Steps

1. Power On

2. Probe Inside Well

3. Probe Move Down Slowly

4. Probe Touch Water

5. Sounder Beep

Notes

Turn off immediately & Remove the battery (9V) after used. 

Probe and the Steel ruler must be clean and neat after used.

Don’t bend the measuring cable to avoid the cable to be damaged.

Storage Temp: -10 ~ +40 ℃. Dry & Ventilated , room temp should below 80% with non-corrosive gas